Products - Shaanxi Gaoton Petroleum Machinery Co.,Ltd

Products

Lift Cap (Lift Nubbin, Lift Bail, Lift Plug, Lifting Cap)
2017-12-26 03:00
Lift Cap Lift Cap is also calledLift Nubbin, Lift Bail, or Lift Plug . It is the tools for lifting ofdrilling tools , such asdrill collars, stabilizers,etc. In the Oil and Gas exploration drilling operation.Size: All size Please specify when ordering: Tec

Hydraulic Cylinder
2017-12-23 07:38
Hydraulic CylinderOur Hydraulic Cylinder are forged of quality alloy steel and made via normalizing. Each piece has been tested by flaw detection before it is sent out of the factory. Our products have high precision, long service life and easy to change.

Float Valve Sub (Plunger Type Float Valve, Flapper Type Float Valve, G Type Float Valve, F Type Floa
2017-12-08 17:05
Float Valve SubFloat Valve Subis usually connected on the top of the bit to control down hole liquid. While stopping pump and connecting with single, it can prevent waterhole from being plugged by re-flowing drilling. When blowout occurs, it can serve as

API Pneumatic Clutch for oil well Mud Pump
2017-12-04 17:43
Pneumatic Clutch: The spirit moves the clutch with compressed air for friction clutch that motive source. Used for needing to be delivered the big torque generally with turn round the directional equipments with the fast a transformation last, such as the

BOP Rubber Core ( Spherical plastic core, Spherical rubber core, Annular BOP packing element, Taper
2017-12-01 16:44
Annular blowout preventerThe annular blowout preventer is divided into thecone rubber coreandspherical rubber coreaccording to the structure of the rubber core. Annular blowout preventer with cone rubber core The annular blowout preventer with cone rubber

Kill Manifold
2017-11-24 13:53
Kill Manifold 1.ApplicationIn case of increase of the well head pressure, thekill manifoldcan provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so than well kick and blowout can be prevented. In this case, by us

Drill Pipe ( DP, Short Drill Pipe, Drill Pipe Tool Joint, Friction welded Drill Pipe )
2017-11-02 16:09
Drill Pipe As the important part ofdrill string , Drill Pipe is used to transmit torque to theDrill Bit . Each Drill Pipe is furnished with a pressed steel thread protectors. In the process of oil and gas extraction and refining, drill pipe can be used re

Extension Rod
2017-10-18 03:43
Extension Rod: The extension rod is one of the important accessories ismud pumppower end, and fustions in delivering motive power to hydraulic end. Material for the intermediate draw bar is 35CrMo, Its surface is chrome-faced, after polishing, its wear-re

Gate Valve ( Expanding gate valve, Rising stem gate valve, Pneumatic gate valve, Hydraulic gate valv
2017-10-16 04:49
API 6A Expanding Gate Valve The Body AndFlangesAre Integral (Non-Welding). Shot Blasting For Every Parts OfValve . Phosphating To Improve Corrosion Resistance.The Valve From 1 13/16” To 4 1/16”Body Made By Integral Die Forging Material. Feature:Metal Seal

Sucker Rod (Polished Rod, Pony Rod, Sucker Rod Coupling, Steel Sucker Rod, Sub Coupling, Hollow rod,
2017-10-15 05:53
Sucker Rod The Sucker Rod is a slender rod, it is connected with the polished rod and well pump, and play the role of power transmission. Grade: C, D, K, KD, HL, HY and KH.Products range:Sucker Rod and Pony Rod Sucker Rod Coupling Polished Rod Super-high

Taper Tap
2017-10-15 00:59
Taper Tap The Taper Tap is especially used for tapping and fishing the fallen substances in the hole from the inner hole,likeoil tubing ,drill pipe ,washover pipe ,packer , and accessories. It has high fishing rate for those fallen pipes with the coupling

Casing Head, Tubing Head
2017-10-06 17:08
Casing Head Casing head is used to fixed well drilling wellhead, connectingwellhead casing string , to support the gravity of the technology of casing and casing, seal the annular space between the tubes of each layer, to install anti preventer, tubing he

Integral Blade Stabilizer ( Stabilizer forging, Stabilizer blank, String Stabilizer, Near-bit Stabil
2017-09-26 13:11
Integral Blade StabilizerIntegral blade stabilizer (IBS) is an important tool in the drilling engineering to control the well deviation. It can stabilize the drilling tools in the drilling process of oil, gas and geological exploration. It can increase th

Type CD Elevator ( Side Door Elevator with square shoulder, Side Latch Elevator )
2017-09-24 13:52
Type CD Elevator Type CD side door elevator with square shoulder(90 degrees) are suitable for hoisting and handling tubing, casing,drill pipe and drill collar in oilgas drilling, work over operation. Standard: API Spec 8C. Technical ParameterIf you have a

Fishing Magnet
2017-09-14 17:20
Fishing Magnet The GAOTON S-Fishing Magnet is ajunk retrieval tooldesigned to retrieve small metal, oddly-shaped objects such as milling shavings, bit cones, cutters, bearings, slips, tong pins, and hand tools from the bottom of the hole. Typically,these

Kelly Valve (Kelly Cock Valve, Upper Kelly Valve, Lower Kelly Valve)
2017-09-13 23:19
Kelly Valve Type:upper Kelly valve and lower Kelly valve Kelly Valveis also calledKelly Cock Valve , which is amanual control valvein drilling string cycle system. It is one of the effective tools for preventing blowout.Upper kelly cock is located at the

Cross Over Sub (Drill Stem Sub, Top Drive Sub, Lift Sub, Saver Sub, Crossover (XO), Abnormity Sub, S
2017-08-29 20:43
Cross Over SubCrossover subis mainly used in oil, gas and geology drilling process to connect with otherdrill stemparts. It is connected of upper drilling tools and lowerdrilling tools . It has well structure and well property. Because of the different co

Safety Clamps (WA-T Safety Clamps, WA-C Safety Clamps, and MP Safety Clamps )
2017-08-19 12:01
Safety Clamps Safety Clamps are tools for handling flush joint pipe anddrill collar . There are three types ofsafety clamps : Type WA-T, Type WA-C and Type MP.Usage: To handle the flush joint pipe and drill collar. You could adjust the No.s of Chain Links

Hole Opener And Reamer ( Hole Opener, Roller Reamer )
2017-07-20 17:46
Hole Opener Fixed Diameter Hole Opener is used for enlarging the drilling hole, which is applies to Onshore and Offshore oilfield industry. Cutters available:SM: soft to medium formationMH: medium to hard formationXH: hard formation Please specify when or

Junk Sub
2017-07-01 15:05
Junk Sub During drilling process, drilling fishing cup is applied mainly for fishing of shivers and fallen objects such as carbide tooth, drill bit and bearing which can not be carried out of hole by conventional fluid circulation, etc. It possesses impor